JPexamのC2050-241問題集を利用してみたらどうですか。この問題集はC2050-241試験に関連するすべての参考書の中で一番優秀なものだと言えます。なぜならば、次の四つの理由があります。第一に、JPexamのC2050-241問題集はIT領域の専門家達が長年の経験を活かして作成されたもので、試験の出題範囲を正確に絞ることができます。第二に、JPexamのC2050-241問題集は実際試験に出題される可能性がある問題を全部含んいます。第三に、JPexamのC2050-241問題集は試験の一発合格を保証し、もし受験生が試験に失敗すれば全額返金のことができます。第四に、JPexamのC2050-241問題集はPDF版とソフト版という二つのバージョンに分けています。この二つのバージョンを利用して、受験生の皆さんは試験の準備をするときにもっと楽になることができます。
なぜ受験生はほとんどJPexamを選んだのですか。JPexamは実践の検査に合格したもので、JPexamの広がりがみんなに大きな利便性と適用性をもたらしたからです。JPexamが提供したIBMのC2090-546試験資料はみんなに知られているものですから、試験に受かる自信がないあなたはJPexamのIBMのC2090-546試験トレーニング資料を利用しなければならないですよ。JPexamを利用したら、あなたはぜひ自信に満ちているようになり、これこそは試験の準備をするということを感じます。
JPexamのIBMのC2050-241試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JPexamの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。
試験番号：C2050-241問題集試験科目：IBM Sterling Order Management V9.2, Solution Design
最近更新時間：2014-08-06
問題と解答：全54問 C2050-241 復習問題集
100％の返金保証。1年間の無料アップデート。
試験番号：C2090-546問題集試験科目：DB2 9.7 Database Administrator for Linux UNIX or Windows Upgrade
最近更新時間：2014-08-06
問題と解答：全78問 C2090-546 資格認定
100％の返金保証。1年間の無料アップデート。
C2050-241認定試験の準備をするために、JPexam の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。JPexam のIBMのC2050-241問題集はあなたが楽に試験に受かることを助けます。JPexam のIBMのC2050-241練習テストはC2050-241試験問題と解答、 C2050-241 問題集、C2050-241 書籍やC2050-241勉強ガイドに含まれています。
JPexamの専門家チームが彼ら自分の知識と経験を使って多くの人の夢が実現させるIT関連の認証試験の問題集を研究し続けています。JPexamが提供したIBMのC2090-546試験問題と解答が真実の試験の練習問題と解答は最高の相似性があります。JPexamがあなたの夢が実現させるサイトでございます。
IBMのC2090-546認定試験を受験すれば、JPexamのC2090-546問題集はあなたが試験の準備をするときに最も選択すべきツールです。この問題集はあなたが楽に試験に合格することを保証します。しかも、これは高く評判されている資料ですから、この問題集を持っていると、もうこれ以上C2090-546試験を心配する必要がなくなります。この問題集はあなたが試験に準備するときに会う可能性があるすべての難問を解決してあげますから。JPexamのC2090-546問題集を購入する前に、問題集の無料なサンプルをダウンロードして試用してもいいです。そうすると、問題集があなたに向いているかどうかを自分で判断することができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/C2050-241_exam.html
NO.1 A retailer's delivery rules do not allow shipping for an open box television (TV) that is more
than 150 miles away. However, they do support moving this TV through a network of stores that are
spread throughout the country, until it reaches a store that supports delivery to the customer. The
retailer needs to configure such a multi-hop transfer of inventory through the supply chain and
provide an accurate promise date to a customer who is over 1000 miles away from the store with
the open box TV. In order to do so, Sterling Order Management considers all the following
configuration settings EXCEPT for:
A. Receiving store calendar.
B. Receipt Processing Time.
C. Delivery resource pool capacity.
D. Transfer relationship across stores.
Answer: C
IBM C2050-241 C2050-241書籍 C2050-241関節
NO.2 A customer purchased a DVD player from a store, and later realized that some of the required
features were missing. The customer tries to return the DVD player for a refund, but the sales order
cannot be located in the Sterling application. Which type of return should be created in the Sterling
application?
A. Refund Order
B. Exchange Order
C. Blind Return Order
D. Speed Exchange Order
Answer: C
IBM受験記 C2050-241合格点 C2050-241スクール
NO.3 A business requirement is to charge payment for the exchange order upfront and then refund
the customer when the returned item is received. This requirement should be configured as a:
A. even exchange.
B. regular exchange.
C. advanced exchange.
D. advanced pre-paid exchange.
Answer: D
IBM練習問題 C2050-241 C2050-241勉強法 C2050-241
NO.4 A customer would like a purchase order (PO) to be "Created", but it should only treat 80% of
future supply as available. This should happen until the PO receives a status update that indicates its
been "Approved", at which point 90% of the future supply can be considered for promising. Future
supply can be considered when scheduling orders but should not be considered when releasing the
pick instructions to the fulfillment center. In order to model this requirement with MINIMAL custom
logic, the solution design must:
A. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for supply type "Purchase order placed" and 90% for supply type
"Inbound approved".5. Use Inventory considerations to map the demand type corresponding to
schedule transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
B. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for demand type "Scheduled" and 90% for demand type
"Released".5. Use Inventory considerations to map the demand type corresponding to schedule
transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
C. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Supply corrections user exit to only show
80% or 90% of supply as applicable.
D. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Availability corrections user exit to only
show 80% or 90% of supply as applicable.
Answer: A
IBM C2050-241特典 C2050-241合格率 C2050-241一発合格 C2050-241
NO.5 In the integration between Sterling Order Management V9.2 and WebSphere Commerce,
which of the following actions will a customer service representative be UNABLE to take when
entering orders through the Sterling application?
A. Make manual adjustments in an order.
B. Enter orders for a customer who has no customer ID.
C. Pre-populate customer information from WebSphere Commerce.
D. Tell customers about promotions and discounts applied to the order.
Answer: C
IBM勉強法 C2050-241難易度 C2050-241認定資格 C2050-241費用
NO.6 A business needs to configure a drop ship from a vendor to a customer directly with visibility
into the purchase order (PO) created by the vendor and status updates on the PO. What should be
done to meet this requirement?
A. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Do not check "Suppress chained order creation
even if seller requires" setting.3. Run Chained_Order_Create to create the purchase order.PO
getting shipped will result in the corresponding sales order line being shipped.
B. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the purchase order.PO getting shipped will
result in the corresponding sales order line being shipped.
C. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the PO. Place custom logic on PO
"Shipped" event to update the corresponding sales order status to"Shipped".
D. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Implement a listener on the PO pipeline that
updates the sales order pipeline.3. Implement custom logic to stamp the PO's delivery location as
customer's address.PO getting shipped will result in the corresponding sales order line being
shipped.
Answer: A
IBM攻略 C2050-241虎の巻 C2050-241初心者 C2050-241科目 C2050-241初心者
NO.7 Which of the following Sterling Call Center business requirements CANNOT be implemented
using the out of the box application?
A. Monitor orders for FTC compliance.
B. Schedule appointments for delivery items.
C. Initiate returns and refunds to customers immediately, if required.
D. Retrieve a WebSphere Commerce shopping cart from the Sterling Call Center.
Answer: D
IBM学習 C2050-241練習問題 C2050-241 C2050-241学習
没有评论:
发表评论