显示标签为“JN0-303”的博文。显示所有博文
显示标签为“JN0-303”的博文。显示所有博文

2014年1月5日星期日

Juniper JN0-303試験の認証資格は一層重要になった

IT領域で仕事しているあなたは、きっとIT認定試験を通して自分の能力を証明したいでしょう。それに、JN0-303認証資格を持っている同僚や知人などますます多くなっているでしょう。そのような状況で、もし一つの資格を持っていないなら他の人に追及できないですから。では、どんな試験を受けるのかは決めましたか。Juniperの試験はどうですか。JN0-303認定試験のようなものはどうでしょうか。これは非常に価値がある試験なのですから、きっとあなたが念願を達成するのを助けられます。

天帝様は公平ですから、人間としての一人一人は完璧ではないです。私のように、以前が努力しなかったので、今は無駄に悩んでいます。現在のIT領域で競争が激しくなっていることは皆は良く知っていますから、みんなはIT認証を通じて自分の価値を高めたいです。私もそう思いますが、IT認証は私にとって大変難しいです。でも、幸い私はインターネットでJPexamのJuniperのJN0-303試験トレーニング資料を見つけました。それを手に入れてから私は試験に合格する自信を持つようになります。JPexamのJuniperのJN0-303試験トレーニング資料のカバー率がとても高いですから、自分で勉強するよりずっと効率が高いです。あなたもIT業種の一人としたら、ためらわずにJPexamのJuniperのJN0-303試験トレーニング資料をショッピングカートに入れましょう。JPexamはきっとあなたが成功への良いアシスタントになります。

多くの時間とお金がいらなくて20時間だけあって楽に一回にJuniperのJN0-303認定試験を合格できます。JPexamが提供したJuniperのJN0-303試験問題と解答が真実の試験の練習問題と解答は最高の相似性があります。

なぜ受験生はほとんどJPexamを選んだのですか。JPexamは実践の検査に合格したもので、JPexamの広がりがみんなに大きな利便性と適用性をもたらしたからです。JPexamが提供したJuniperのJN0-303試験資料はみんなに知られているものですから、試験に受かる自信がないあなたはJPexamのJuniperのJN0-303試験トレーニング資料を利用しなければならないですよ。JPexamを利用したら、あなたはぜひ自信に満ちているようになり、これこそは試験の準備をするということを感じます。

JPexamは100%の合格率を保証するだけでなく、1年間の無料なオンラインの更新を提供しております。最新の資源と最新の動態が第一時間にお客様に知らせいたします。何の問題があったらお気軽に聞いてください。

試験番号:JN0-303問題集
試験科目:Juniper networks Certified internet specialist.m(jncis-m)
最近更新時間:2014-01-05
問題と解答:全150問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-303_exam.html

NO.1 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper認証試験   JN0-303練習問題   JN0-303参考書   JN0-303   JN0-303   JN0-303認定証

NO.2 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper過去問   JN0-303認定試験   JN0-303認定証   JN0-303認証試験   JN0-303   JN0-303

NO.3 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper   JN0-303   JN0-303認定試験   JN0-303認定試験   JN0-303認定証

NO.4 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper   JN0-303   JN0-303   JN0-303問題集

NO.5 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper   JN0-303過去問   JN0-303認定資格   JN0-303   JN0-303

NO.6 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper   JN0-303認証試験   JN0-303参考書   JN0-303問題集

NO.7 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper   JN0-303認証試験   JN0-303認証試験   JN0-303認定資格

NO.8 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper認定証   JN0-303   JN0-303認証試験   JN0-303認定証

NO.9 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper認定証   JN0-303   JN0-303練習問題   JN0-303練習問題   JN0-303参考書

NO.10 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper   JN0-303認定証   JN0-303認定資格   JN0-303参考書   JN0-303   JN0-303過去問

NO.11 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper   JN0-303   JN0-303

NO.12 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper   JN0-303   JN0-303

NO.13 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper   JN0-303練習問題   JN0-303   JN0-303   JN0-303問題集

NO.14 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper   JN0-303過去問   JN0-303   JN0-303参考書

NO.15 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper参考書   JN0-303   JN0-303   JN0-303

NO.16 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper問題集   JN0-303   JN0-303認定試験   JN0-303練習問題   JN0-303認証試験

NO.17 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper認証試験   JN0-303参考書   JN0-303   JN0-303練習問題   JN0-303参考書   JN0-303認証試験

NO.18 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper   JN0-303   JN0-303参考書   JN0-303過去問   JN0-303認証試験

NO.19 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper   JN0-303認定証   JN0-303参考書   JN0-303認証試験   JN0-303

NO.20 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper   JN0-303   JN0-303認定資格   JN0-303認定試験

JPexamは最新のLOT-407問題集と高品質の000-657問題と回答を提供します。JPexamのMB7-701 VCEテストエンジンと000-273試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の648-238 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/JN0-303_exam.html

2013年8月26日星期一

Juniper JN0-303 exam study materials

Add IT-Tests's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Juniper certification JN0-303 exam. At last, you will not regret your choice.

In order to pass the Juniper JN0-303 exam, selecting the appropriate training tools is very necessary. And the study materials of Juniper JN0-303 exam is a very important part. IT-Tests.com can provide valid materials to pass the Juniper JN0-303 exam. The IT experts in IT-Tests.com are all have strength aned experience. Their research materials are very similar with the real exam questions . IT-Tests.com is a site that provide the exam materials to the people who want to take the exam. and we can help the candidates to pass the exam effectively.

Exam Code: JN0-303
Exam Name: Juniper Juniper networks Certified internet specialist.m(jncis-m) JN0-303
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Updated: 2013-08-26

IT-Tests.com is an excellent IT certification examination information website. In IT-Tests.com you can find exam tips and materials about Juniper certification JN0-303 exam. You can also free download part of examination questions and answers about Juniper JN0-303 in IT-Tests. IT-Tests.com will timely provide you free updates about Juniper JN0-303 exam materials. Besides, the exam materials we sold are to provide the answers. Our IT experts team will continue to take advantage of professional experience to come up with accurate and detailed exam practice questions to help you pass the exam. In short, we will provide you with everything you need about Juniper certification JN0-303 exam.

If you're still studying hard to pass the Juniper JN0-303 exam, IT-Tests.com help you to achieve your dream. We provide you with the best Juniper JN0-303 exam materials. It passed the test of practice, and with the best quality. It is better than Juniper JN0-303 tutorials and any other related materials. It can help you to pass the Juniper JN0-303 exam, and help you to become a strong IT expert.

IT-Tests.com is a website that provide the counseling courses for IT professionals to participate in Juniper certification JN0-303 exam and help them get the Juniper JN0-303 certification. The courses of IT-Tests.com is developed by experienced experts' extensive experience and expertise and the quality is very good and have a very fast update rate. Besides, exercises we provide are very close to the real exam questions, almost the same. When you select IT-Tests, you are sure to 100% pass your first time to participate in the difficult and critical Juniper certification JN0-303 exam.

According to the research of the past exams and answers, IT-Tests.com provide you the latest Juniper JN0-303 exercises and answers, which have have a very close similarity with real exam. IT-Tests.com can promise that you can 100% pass your first time to attend Juniper certification JN0-303 exam.

JN0-303 (Juniper networks Certified internet specialist.m(jncis-m)) Free Demo Download: http://www.it-tests.com/JN0-303.html

NO.1 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper exam   JN0-303 test   JN0-303 dumps   JN0-303 test answers   JN0-303 exam dumps

NO.2 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper exam   JN0-303   JN0-303 test answers   JN0-303 practice test

NO.3 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper   JN0-303   JN0-303   JN0-303 questions

NO.4 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper braindump   JN0-303 questions   JN0-303 answers real questions   JN0-303

NO.5 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper   JN0-303 exam simulations   JN0-303   JN0-303 demo

NO.6 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper   JN0-303 test questions   JN0-303 exam dumps

NO.7 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper   JN0-303   JN0-303   JN0-303   JN0-303 test questions   JN0-303

NO.8 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper certification training   JN0-303   JN0-303

NO.9 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303   JN0-303 certification   JN0-303 test answers

NO.10 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper dumps   JN0-303   JN0-303 test   JN0-303

NO.11 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper exam dumps   JN0-303   JN0-303   JN0-303

NO.12 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper pdf   JN0-303   JN0-303 dumps   JN0-303

NO.13 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper certification   JN0-303 exam simulations   JN0-303   JN0-303 test

NO.14 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper study guide   JN0-303 exam simulations   JN0-303   JN0-303

NO.15 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper pdf   JN0-303   JN0-303   JN0-303

NO.16 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper questions   JN0-303 practice test   JN0-303   JN0-303   JN0-303

NO.17 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper   JN0-303   JN0-303 exam prep   JN0-303 answers real questions   JN0-303 test   JN0-303

NO.18 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper   JN0-303   JN0-303   JN0-303

NO.19 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper   JN0-303 exam dumps   JN0-303 questions   JN0-303 practice test   JN0-303

NO.20 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper test   JN0-303   JN0-303   JN0-303 exam

If you use the IT-Tests.com Juniper JN0-303 study materials, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. Before you decide to buy our Juniper JN0-303 exam materials, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff.

2013年8月20日星期二

IT-Tests.com Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam practice questions and answers

Juniper certification JN0-330 JN0-531 JN0-130 JN0-303 exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money. IT-Tests.com provide a training scheme for Juniper certification JN0-330 JN0-531 JN0-130 JN0-303 exam, which only needs 20 hours to complete and can help you well consolidate the related IT professional knowledge to let you have a good preparation for your first time to participate in Juniper certification JN0-330 JN0-531 JN0-130 JN0-303 exam.


IT-Tests.com's Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam training materials provide the two most popular download formats. One is PDF, and other is software, it is easy to download. The IT professionals and industrious experts in IT-Tests.com make full use of their knowledge and experience to provide the best products for the candidates. We can help you to achieve your goals.


If you are looking for a good learning site that can help you to pass the Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam, IT-Tests.com is the best choice. IT-Tests.com will bring you state-of-the-art skills in the IT industry as well as easily pass the Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam. We all know that this exam is tough, but it is not impossible if you want to pass it. You can choose learning tools to pass the exam. I suggest you choose IT-Tests.com Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam questions and answers. I suggest you choose IT-Tests.com Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam questions and answers. The training not only complete but real wide coverage. The test questions have high degree of simulation. This is the result of many exam practice. . If you want to participate in the Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam, then select the IT-Tests.com, this is absolutely right choice.


Passing JN0-330 JN0-531 JN0-130 JN0-303 exam is not very simple. JN0-330 JN0-531 JN0-130 JN0-303 exam requires a high degree of professional knowledge of IT, and if you lack this knowledge, IT-Tests.com can provide you with a source of IT knowledge. IT-Tests's expert team will use their wealth of expertise and experience to help you increase your knowledge, and can provide you practice questions and answers JN0-330 JN0-531 JN0-130 JN0-303 certification exam. IT-Tests.com will not only do our best to help you pass the JN0-330 JN0-531 JN0-130 JN0-303 certification exam for only one time, but also help you consolidate your IT expertise. If you select IT-Tests, we can not only guarantee you 100% pass JN0-330 JN0-531 JN0-130 JN0-303 certification exam, but also provide you with a free year of exam practice questions and answers update service. And if you fail to pass the examination carelessly, we can guarantee that we will immediately 100% refund your cost to you.


Exam Code: JN0-330

Exam Name: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))

Exam Code: JN0-531

Exam Name: Juniper (FWV, Specailist(JNCIS-FWV))

Exam Code: JN0-130

Exam Name: Juniper (Juniper networks Certified internet specialist.e(jncis-e))

Exam Code: JN0-303

Exam Name: Juniper (Juniper networks Certified internet specialist.m(jncis-m))

IT-Tests.com's Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of IT-Tests.com, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.


All the IT professionals are familiar with the Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam. And everyone dreams pass this demanding exam. Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the IT-Tests.com's Juniper JN0-330 JN0-531 JN0-130 JN0-303 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the IT-Tests.com, then you will hold the hand of success, and never miss it.


JN0-130 (Juniper networks Certified internet specialist.e(jncis-e)) Free Demo Download: http://www.it-tests.com/JN0-130.html


NO.1 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper   JN0-130 certification training   JN0-130 dumps

NO.2 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper   JN0-130 test   JN0-130 test answers   JN0-130   JN0-130 demo

NO.3 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130 exam dumps   JN0-130 practice test

NO.4 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper   JN0-130 original questions   JN0-130

NO.5 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper test questions   JN0-130   JN0-130   JN0-130   JN0-130 test

NO.6 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper   JN0-130 test   JN0-130 certification training   JN0-130

NO.7 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130 questions   JN0-130

NO.8 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper exam simulations   JN0-130 dumps   JN0-130

NO.9 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper practice test   JN0-130   JN0-130 dumps   JN0-130 test questions

NO.10 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper exam   JN0-130   JN0-130   JN0-130   JN0-130
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper certification   JN0-130   JN0-130   JN0-130   JN0-130
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper exam prep   JN0-130   JN0-130   JN0-130 test questions
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper original questions   JN0-130   JN0-130
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper   JN0-130   JN0-130   JN0-130   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper   JN0-130 test   JN0-130   JN0-130   JN0-130 braindump
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130   JN0-130   JN0-130 answers real questions
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper exam prep   JN0-130 test questions   JN0-130 test answers   JN0-130   JN0-130 questions
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper questions   JN0-130   JN0-130   JN0-130 questions
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130 practice test   JN0-130   JN0-130 study guide
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper   JN0-130   JN0-130   JN0-130   JN0-130 certification training
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper   JN0-130 answers real questions   JN0-130 test questions   JN0-130   JN0-130 certification
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper   JN0-130   JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130 exam simulations   JN0-130 pdf   JN0-130 practice test
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper exam dumps   JN0-130   JN0-130 certification training   JN0-130 original questions   JN0-130
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper   JN0-130   JN0-130 test   JN0-130

NO.11 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130   JN0-130   JN0-130   JN0-130 exam simulations

NO.12 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130   JN0-130

NO.13 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper original questions   JN0-130 practice test   JN0-130

NO.14 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper certification training   JN0-130 test   JN0-130   JN0-130   JN0-130

NO.15 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper original questions   JN0-130 test questions   JN0-130   JN0-130