たくさんの人はHP HP0-Y16認証試験を通ることが難しいと思います。もし弊社の問題集を勉強してそれは簡単になります。弊社はオンラインサービスとアフターサービスとオンラインなどの全面方面を含めてます。オンラインサービスは研究資料模擬练習問題などで、アフターサービスはJPexamが最新の認定問題だけでなく、絶えずに問題集を更新しています。
適切なトレーニングを選ぶのは成功の保証になれますが、何を選ぶのは非常に重要なことです。JPexamはとても人気がありますから、それを選ばない理由はないです。もちろん、完璧なトレーニング資料を差し上げましたが、もしあなたに向いていないのなら無用になりますから、JPexamを利用する前に、一部の問題と解答を無料にダウンロードしてみることができます。そうしたら、完全な試験準備をして、気楽に試験を受かることができるようになります。それも何千何万の受験生がJPexamを選んだ重要な理由です。JPexamは一番よい、一番実用的な、一番完全な試験トレーニング資料を提供していますから、受験生たちが試験を準備することに意重要な助けになります。
JPexamの商品を使用したあとのひとはJPexamの商品がIT関連認定試験に対して役に立つとフィードバックします。弊社が提供した商品を利用すると試験にたやすく合格しました。HPのHP0-Y16認証試験に関する訓練は対応性のテストで君を助けることができて、試験の前に十分の準備をさしあげます。
試験番号：HP0-Y16問題集
試験科目：ProCurve Network Immunity Solutions
最近更新時間：2013-12-26
問題と解答：全88問
100％の返金保証。1年間の無料アップデート。
JPexamの専門家チームが君の需要を満たすために自分の経験と知識を利用してHPのHP0-Y16認定試験対策模擬テスト問題集が研究しました。模擬テスト問題集と真実の試験問題がよく似ています。一目でわかる最新の出題傾向でわかりやすい解説と充実の補充問題があります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/HP0-Y16_exam.html
NO.1 Which events can be signs of an unauthorized port scan? (Select two.)
A. Port Anomaly
B. DNS Tunneling
C. TCP/UDP Fanout
D. UDP Protocol Anomaly
E. TCP Protocol Anomaly
Answer: CE
HP参考書 HP0-Y16 HP0-Y16 HP0-Y16
NO.2 Click the Exhibit button.
Given the information shown in the exhibit, what do you know about alerts on the 10.1.1.1 device over the
last five hours? (Note: The orange color corresponds with Major severity.)
A. The device has received only Major alerts.
B. The majority of alerts on the device are Major alerts.
C. The highest severity for an alert on this device is Major.
D. The most recent alert received on the device was a Major alert.
Answer: C
HP HP0-Y16認定試験 HP0-Y16 HP0-Y16認定資格
NO.3 Which alert can be triggered by SNMP traps sent by ProCurve switches?
A. default External
B. default IP Fanout
C. default IP Spoofing
D. default Virus Throttle
E. default ProCurve SNMP
Answer: D
HP HP0-Y16 HP0-Y16過去問 HP0-Y16 HP0-Y16問題集
NO.4 What must you do to configure a Port Rate Limit action?
A. Set the rate limit as a percentage.
B. Set the rate limit as a QoS priority value.
C. Set the rate limit as an absolute value in Kbps.
D. Enable the limit, leaving the rate to be determined by the switch configuration.
Answer: A
HP HP0-Y16 HP0-Y16 HP0-Y16認定資格 HP0-Y16練習問題
NO.5 You want to set up different external alerts based on the specific type of threat. Which settings can
help you accomplish this task? (Select two.)
A. Trap ID
B. Severity
C. Description
D. Anomaly ID
E. Violation Count
Answer: AC
HP認定資格 HP0-Y16 HP0-Y16過去問
NO.6 How do you configure PCM+ to generate periodic reports?
A. Select the Reports button in the global toolbar.
B. Enable the periodic reports setting in PCM+ Preferences.
C. Configure the schedule in the appropriate Reports Wizard.
D. Create policies with schedule-driven alerts and report actions.
Answer: D
HP HP0-Y16 HP0-Y16過去問 HP0-Y16問題集 HP0-Y16練習問題
NO.7 What should you do to set up your network infrastructure for remote mirroring?
A. Enable jumbo frames.
B. Enable frame fragmentation.
C. Raise the maximum transmit unit (MTU).
D. Reserve uplink ports for the mirroring session.
Answer: A
HP HP0-Y16練習問題 HP0-Y16認定証 HP0-Y16 HP0-Y16認定試験
NO.8 Which action can help you troubleshoot a policy in realtime from PCM?
A. Port Mirror
B. Notify (Email)
C. Message Dialog
D. Traffic Sampling
Answer: C
HP練習問題 HP0-Y16練習問題 HP0-Y16 HP0-Y16
NO.9 A network already has an Intrusion Prevention System (IPS) that is installed between a group of
servers and the rest of the network. Which benefits does ProCurve NIM add in a NIM + IPS deployment?
(Select two.)
A. deep packet inspection
B. signature-based detection
C. remediation of infected endpoints
D. protection for other resources throughout the network
E. applies actions closer to the point of origin of the attack
Answer: DE
HP HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16
NO.10 Click the Exhibit button.
You are configuring a Quarantine VLAN action.
Which area in the exhibit displays settings that allow ProCurve NIM to always place the offender in the
Quarantine VLAN?
A. a
B. b
C. c
D. d
Answer: D
HP認定証 HP0-Y16認定試験 HP0-Y16参考書 HP0-Y16 HP0-Y16
NO.11 Which features are provided in a ProCurve NIM standalone deployment? (Select two.)
A. threat mitigation without the aid of PCM+
B. resetting of TCP sessions when threats are detected
C. signature-based detection of worms and other attacks
D. applying mitigation actions near the source of the threat
E. application of different policies based on the threat's place of origin
Answer: DE
HP HP0-Y16 HP0-Y16問題集 HP0-Y16練習問題
NO.12 Which statement is true about the role that events play in ProCurve NIM?
A. When a particular event occurs, ProCurve NIM executes the corresponding alert.
B. When a particular event occurs, ProCurve NIM executes the corresponding policy.
C. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding alert.
D. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding policy.
Answer: C
HP HP0-Y16 HP0-Y16認定資格 HP0-Y16
NO.13 Which threat mitigation action is supported on ProCurve wireless devices?
A. Port Disable
B. MAC Lockout
C. Port Rate Limit
D. Quarantine VLAN
Answer: B
HP問題集 HP0-Y16 HP0-Y16認定試験 HP0-Y16 HP0-Y16認証試験
NO.14 By default, which NBAD event will trigger traffic sampling on a port?
A. Duplicate IP
B. Virus Throttle
C. Protocol Anomaly
D. Packet Size Deviation
Answer: D
HP HP0-Y16 HP0-Y16
NO.15 What might indicate that the sensitivity for IP fanout has been set too high?
A. IP Fanout events appear in the Events tab for almost every switch.
B. Although you do not see IP Fanout events, the IP Fanout alert triggers.
C. IP Fanout events appear in the Events tab for one switch but not others.
D. There are no IP Fanout events for days although you have configured an IP Fanout alert.
Answer: A
HP HP0-Y16 HP0-Y16 HP0-Y16認定試験 HP0-Y16過去問
NO.16 What is a reason to create a custom group for a server zone and set that group as the source for a NIM
policy?
A. Servers handle more mission-critical traffic, so you set less drastic actions.
B. Servers trigger more false positives, so you set the NBAD sensitivities lower.
C. Threats are targeted to servers at all times, so you set the policy to any time.
D. Threats that are targeted to servers are more serious, so you set harsher actions.
Answer: A
HP HP0-Y16練習問題 HP0-Y16過去問 HP0-Y16 HP0-Y16認定資格
NO.17 Click the Exhibit button.
Which port in the exhibit should you select in PCM+ and configure as the mirror destination?
A. 1
B. A6
C. X0
D. B16
E. 25-48
Answer: B
HP HP0-Y16 HP0-Y16 HP0-Y16
NO.18 Which misconfiguration on PCM+ causes ProCurve NIM to fail to detect any anomalies in traffic?
A. the wrong sFlow version
B. an incorrect operator password
C. an incorrect manager password
D. an incorrect SNMP community name
Answer: D
HP HP0-Y16参考書 HP0-Y16 HP0-Y16練習問題
NO.19 How does ProCurve NIM determine the severity level for a security alert?
A. from the violation count for the associated event
B. from the event, and the severity cannot be overridden
C. from the event, unless overridden by the alert configuration
D. from the event for trap events and from the alert configuration for other events
Answer: C
HP HP0-Y16 HP0-Y16認証試験 HP0-Y16
NO.20 From which NBAD event should you often exclude your servers?
A. DNS Tunneling
B. TCP/UDP Fanout
C. Protocol Anomaly
D. Packet Size Deviation
Answer: B
HP HP0-Y16認定証 HP0-Y16
NO.21 Click the Exhibit button.
What are reasons to configure the policy settings shown in the exhibit? (Select two.)
A. You want the policy to respond to threats from offenders within this group.
B. You want ProCurve NIM to apply the policy for threats detected in this group.
C. You have set the policy to a source group, so you must set the target group to match.
D. You want to enable dynamic local port mirroring on set ports, which compose this group.
E. The policy action is MAC Lockout, and you want to lock the offender out of the entire group.
Answer: DE
HP参考書 HP0-Y16 HP0-Y16認定試験 HP0-Y16
NO.22 You want to display and print a list of all events related to the Policy Manager. What should you do?
A. From the Reports menu, select the Policy Events report.
B. In Interconnect Devices, click the Events tab; filter for Policy Manager; click the Print button.
C. From the Reports menu, select the Events report; filter for Policy Manager in the Report Wizard.
D. In Network Management Home, click the Events tab; filter for Policy Manager; click the Print button.
Answer: D
HP認定証 HP0-Y16 HP0-Y16 HP0-Y16認定証
NO.23 What is the intended purpose of the default traffic sampling action of ProCurve NIM?
A. to prevent ProCurve NIM from triggering false positives
B. to help PCM+/NIM periodically begin to monitor new ports
C. to send traffic for increased analysis to an Intrusion Detection System (IDS)
D. to allow ProCurve NIM to take immediate action against the most probable threats
Answer: B
HP認定証 HP0-Y16過去問 HP0-Y16認定試験
NO.24 Your company's regulatory compliance group has asked you for a record of changes to the Policy
Manager policies. Which report should you generate?
A. Security Audit
B. Actions by Policy
C. Executed Policies
D. Automation (Policy) History
Answer: C
HP過去問 HP0-Y16練習問題 HP0-Y16練習問題 HP0-Y16
NO.25 Which statement is true about setting up an action for dynamic remote mirroring?
A. You should configure the mirror source before configuring the action.
B. You should configure the mirror destination before configuring the action.
C. You configure both the mirror source and destination as part of configuring the action.
D. You should configure both the mirror source and destination before configuring the action.
Answer: B
HP HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16問題集
NO.26 When should the unified NIM + IDS deployment option be used?
A. to take immediate action to protect key resources and also track threats to the source
B. to add threat protection to the features of ProCurve NIM, which include only threat detection
C. to allow ProCurve NIM to mirror suspicious traffic to an external device for additional analysis
D. to protect against threats from wireless devices, which ProCurve NIM is not able to do on its own
Answer: C
HP認証試験 HP0-Y16 HP0-Y16認定証 HP0-Y16練習問題 HP0-Y16
NO.27 What is a feature of anomaly-based threat detection but not signature-based threat detection?
A. detecting worms
B. detecting DoS attacks
C. detecting protocol anomalies
D. detecting undocumented attacks
Answer: D
HP認証試験 HP0-Y16 HP0-Y16認定資格 HP0-Y16
NO.28 Which tab is added to PCM+ when you install ProCurve NIM?
A. Policy Events
B. Security Audit
C. Event Browser
D. Security Activity
Answer: D
HP HP0-Y16 HP0-Y16 HP0-Y16練習問題
NO.29 How does a ProCurve Network Immunity Solution protect a network?
A. It deals with threats from authorized users.
B. It stops unauthorized users from connecting.
C. It customizes users' rights based on their identity.
D. It filters Web content and email while searching for viruses.
Answer: A
HP HP0-Y16認定資格 HP0-Y16過去問
NO.30 ProCurve NIM was registering few TCP/UDP Fanout events. You have raised the sensitivity, and
many false positive TCP/UDP Fanout events are now triggered throughout the network. What should you
do next? (Select two.)
A. Lower the sensitivity to the previous level.
B. Remove the TCP/UDP alert from all policies.
C. Plan and create a Policy Manager policy to deal with false positive events.
D. Exclude the devices triggering the false positive events from the TCP/UDP fanout.
Answer: AD
HP参考書 HP0-Y16 HP0-Y16認証試験 HP0-Y16練習問題
JPexamは最新のC_TFIN52_64問題集と高品質の000-593問題と回答を提供します。JPexamの1D0-610 VCEテストエンジンと646-048試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のVCP510-DT PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论