弊社の商品は試験の範囲を広くカバーすることが他のサイトがなかなか及ばならないです。それほかに品質はもっと高くてJuniperのJN0-201認定試験の受験生が最良の選択であり、成功の最高の保障でございます。
現在のネットワークの全盛期で、JuniperのJN0-201の認証試験を準備するのにいろいろな方法があります。JPexamが提供した最も依頼できるトレーニングの問題と解答はあなたが気楽にJuniperのJN0-201の認証試験を受かることに助けを差し上げます。JPexamにJuniperのJN0-201の試験に関する問題はいくつかの種類がありますから、すべてのIT認証試験の要求を満たすことができます。
ここで説明したいのはJPexamにあるコアバリューです。全てのJuniperのJN0-201試験は非常に大切ですが、この情報技術が急速に発展している時代に、JPexamはただその中の一つだけです。ではなぜほとんどの人々はJPexamを選んだのですか。それはJPexamが提供する問題資料は絶対あなたが試験に受かることを助けられるからです。JPexamが提供する資料は最新のトレーニングツールが常にアップデートして認証試験の目標を変換するの結果です。JPexam はあなたに最新の試験研究資料を提供しますから、JPexam JuniperのJN0-201問題集を持っていたら、試験に直面する自信に満ちることができ、合格しないなんて全然心配することはなく気楽に試験に受かることができます。
JPexamの問題集はIT専門家がJuniperのJN0-201認証試験について自分の知識と経験を利用して研究したものでございます。JPexamの問題集は真実試験の問題にとても似ていて、弊社のチームは自分の商品が自信を持っています。JPexamが提供した商品をご利用してください。もし失敗したら、全額で返金を保証いたします。
試験番号：JN0-201問題集
試験科目：Juniper networks Certified internet associate.m(jncia-m)
最近更新時間：2013-12-27
問題と解答：全120問
100％の返金保証。1年間の無料アップデート。
JPexamの経験豊富な専門家チームはJuniperのJN0-201認定試験に向かって専門性の問題集を作って、とても受験生に合っています。JPexamの商品はIT業界中で高品質で低価格で君の試験のために専門に研究したものでございます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-201_exam.html
NO.1 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper JN0-201過去問 JN0-201認定証 JN0-201
NO.2 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
Juniper JN0-201 JN0-201認定証 JN0-201練習問題
NO.3 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
Juniper参考書 JN0-201 JN0-201認証試験 JN0-201 JN0-201認定試験
NO.4 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper JN0-201 JN0-201 JN0-201 JN0-201
NO.5 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper JN0-201認証試験 JN0-201認証試験 JN0-201過去問
NO.6 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
Juniper JN0-201 JN0-201認定証
NO.7 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper参考書 JN0-201認定証 JN0-201練習問題 JN0-201
NO.8 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper問題集 JN0-201 JN0-201 JN0-201問題集
NO.9 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
Juniper練習問題 JN0-201練習問題 JN0-201
NO.10 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
Juniper認定証 JN0-201 JN0-201
NO.11 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper JN0-201 JN0-201認定資格 JN0-201認証試験
NO.12 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper JN0-201 JN0-201練習問題 JN0-201認定試験
NO.13 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
Juniper JN0-201過去問 JN0-201 JN0-201認証試験 JN0-201
NO.14 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper認証試験 JN0-201練習問題 JN0-201 JN0-201練習問題
NO.15 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper認定資格 JN0-201 JN0-201認定資格 JN0-201 JN0-201問題集
NO.16 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper認証試験 JN0-201 JN0-201 JN0-201 JN0-201
NO.17 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper認定資格 JN0-201練習問題 JN0-201参考書 JN0-201
NO.18 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper認証試験 JN0-201 JN0-201認定試験
NO.19 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
Juniper JN0-201認証試験 JN0-201
NO.20 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper問題集 JN0-201 JN0-201参考書 JN0-201
JPexamは最新の74-343問題集と高品質の000-959問題と回答を提供します。JPexamのCUR-009 VCEテストエンジンとHH0-240試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のVCP5-DCV PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论