Exam JN0-692 braindumps

IT-Tests.com promise that we will spare no effort to help you pass Juniper certification JN0-692 exam. Now you can free download part of practice questions and answers of Juniper certification JN0-692 exam on IT-Tests. When you select IT-Tests, you can not only pass Juniper certification JN0-692 exam, but also have one year free update service. IT-Tests.com can also promise if you fail to pass the exam, IT-Tests.com will 100% refund.

Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. They would choose this difficult Juniper certification JN0-692 exam to get certification and gain recognition in IT area. Juniper JN0-692 is very difficult and passing rate is relatively low. But enrolling in the Juniper certification JN0-692 exam is a wise choice, because in today's competitive IT industry, we should constantly upgrade ourselves. However, you can choose many ways to help you pass the exam.

With the arrival of the flood of the information age of the 21st century, people are constantly improve their knowledge to adapt to the times. But this is still not enough. In the IT industry, Juniper's JN0-692 exam certification is the essential certification of the IT industry. Because this exam is difficult, through it, you may be subject to international recognition and acceptance, and you will have a bright future and holding high pay attention. IT-Tests.com has the world's most reliable IT certification training materials, and with it you can achieve your wonderful plans. We guarantee you 100% certified. Candidates who participate in the Juniper JN0-692 certification exam, what are you still hesitant？Just do it quickly!

Juniper JN0-692 is a certification exam to test IT professional knowledge. IT-Tests.com is a website which can help you quickly pass the Juniper certification JN0-692 exams. Before the exam, you use pertinence training and test exercises and answers that we provide, and in a short time you'll have a lot of harvest.

The life which own the courage to pursue is wonderful life. Someday when you're sitting in a rocking chair to recall your past, and then with smile in your face. Then your life is successful. Do you want to be successful in life? Then use IT-Tests.com's Juniper JN0-692 exam training materials quickly. This material including questions and answers and every IT certification candidates is very applicable. The success rate can reach up to 100%. Why not action? Quickly to buy it please.

Exam Code: JN0-692
Exam Name: Juniper (Service Provider Routing and Switching Support, Professional)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 171 Questions and Answers
Last Update: 2013-12-13

When you click into IT-Tests.com's site, you will see so many people daily enter the website. You can not help but be surprised. In fact, this is normal. IT-Tests.com is provide different training materials for alot of candidates. They are using our training materials tto pass the exam. This shows that our Juniper JN0-692 exam training materials can really play a role. If you want to buy, then do not miss IT-Tests.com website, you will be very satisfied.

JN0-692 (Service Provider Routing and Switching Support, Professional) Free Demo Download: http://www.it-tests.com/JN0-692.html

NO.1 You have recently added LDP-signaled VPLS to your network. The VPLS connections are
established and you have been asked to verify that the forwarding plane is working properly. Which
three commands would you use? (Choose three.)
A. ping mpls Idp <fec>
B. show vpls connections
C. traceroute mpls Idp <fec>
D. show vpls mac-table
E. show Idp statistics
Answer: A,C,D

Juniper   JN0-692 original questions   JN0-692 study guide   JN0-692 practice test   JN0-692 test
10. R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.
Which two reasons would account for this happening? (Choose two.)
A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area
Answer: B,D

Juniper braindump   JN0-692 study guide   JN0-692   JN0-692

NO.2 You have applied a customized EXP rewrite rule on router R1 on the egress of the interface
connecting to router R2. You want to verify if it is working properly. Which two methods would you
use to accomplish this task? (Choose two.)
A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets
for the new EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets
coming from R1.
Answer: C,D

Juniper questions   JN0-692 exam simulations   JN0-692   JN0-692

NO.3 Your OSPF network includes an NSSA. Which LSA type is injected into the NSSA by the ASBR?
A. Type 3
B. Type 5
C. Type 7
D. Type 9
Answer: C

Juniper   JN0-692   JN0-692

NO.4 One of your router's OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)
A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.
Answer: A,C,E

Juniper dumps   JN0-692 exam simulations   JN0-692 test questions

NO.5 You recently added your autonomous system to an existing BGP confederation. You notice that
a route that had a local preference of 100 now has a local preference of 50. Which statement
explains the change?
A. BGP path attributes such as next hop, local preference, and MED are normally restricted to a
single AS but are allowed to propagate throughout the confederation's AS members.
B. The confederation has sub-ASs that require all IBGP routes to have a local preference of 50 or
below.
C. When your Junos devices joined the confederation, they lost IBGP connectivity to the route in
question; the local preference reverted to 50 once the BGP peering established.
D. The route is being shared through an EBGP peer, and the confederation is propagating the local
preference from the peer.
Answer: A

Juniper   JN0-692 braindump   JN0-692   JN0-692 exam dumps   JN0-692 pdf

NO.6 Your currently configured regular expression does not match the AS path shown below:
2135.55 55 55 55 3796
Which three regular expressions would match this path? (Choose three.)
A. "."2135"
B. "2135.*"
C. "* 55(1, 3) *"
D. "2135 55(5) 3796"
E. "2135 55(1, 2) 3796"
Answer: B,C,E

Juniper   JN0-692 test questions   JN0-692 answers real questions

NO.7 You have recently implemented a new Layer 2 VPN and it is not establishing. The show I2vpn
connections command displays an out-of-range state.
What is causing this problem?
A. The local site ID value is too high for the label block.
B. The VRF target community values do not match between sites.
C. The VRF route distinguisher values do not match between sites.
D. The local site ID is not defined.
Answer: A

Juniper   JN0-692   JN0-692   JN0-692 exam

NO.8 An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two
causes? (Choose two.)
A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.
Answer: C,D

Juniper   JN0-692   JN0-692 test

NO.9 You are asked to retain several routes from an external BGP neighbor in the routing table on
your local router, but you are not allowed to forward traffic to these destinations. You have
configured a forwarding table firewall filter to block these routes, and applied it under the (edit
forwarding-options] hierarchy, but the routes are still showing up in the forwarding table. What is
required to achieve this task?
A. Configure an EBGP import policy on your local router to block the routes.
B. Have the EBGP neighbor configure an export policy to block the routes.
C. Configure an export policy for the forwarding table to block the routes.
D. Use the no-install configuration statement within the EBGP neighbor group on your local router.
Answer: C

Juniper exam simulations   JN0-692   JN0-692

IT-Tests.com offer the latest C_TFIN52_64 Questions & Answers and high-quality 200-120 PDF Practice Test. Our MB6-872 VCE testing engine and ACMA_6.1 study guide can help you pass the real exam. High-quality EX0-118 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-692.html